ACROMOL

ACROMOL is a super quality chemical release agent to provide easy release to formwork and high quality surface finish to concrete even with white cements. It is a thin yellowish liquid of sprayable consistency. It is a blend of natural organic chemicals, which impart a waterproof film to prevent adhesion of concrete forms and provide for quick and easy release.

Make an Enquiry Find A Store

Benefits

High durable
Economical
Damp-proof, heat-reflective
Liquid instant leak plugging
Nonflammable & pollution free
Excellent bonding strength
Algae and fungus resistant
Weather resistance
Reduce maintenance cost
Prevents seepages from the ceiling and walls
Water absorption can be decreased
Protection from Environmental Effects
Extremely useful for Blindside Work
Provides a reliable secondary barrier against rainwater, moisture and ground water ingress into the concrete
Smooth Finish
Non-Toxic suitable for contact with Drinking Water
Protects against the effects of concrete carbonation, efflorescence or salt petering
Waterproofing protection of up to 7 bar hydrostatic pressure
High sheen, brilliant white colour and thick coat results in a high levels of heat reflectance
Reduces carbon dioxide and chloride ion diffusion thus protecting rebars against corrosion
Unmatched crack bridging ability due to elastomeric properties
Reinforced with fibres for superior abrasion resistance
Strong adhesion to masonry substrates
Single pack, easy to apply by brush /roller and simple recoating
Acropoxy BA can be applied to both dry and wet surfaces.
Far greater bond strength than the tensile strength of the concrete. Most suitable for structural bonding of new to existing concrete.
Special slow set hardener is available on request
Reliable * Produced under strict quality control.
It compensates plastic shrinkage and natural settlement in cementitious grouts.
It gives high fluidity with lower W/C ratio for easier placement and injection.
Chloride Free – no corrosion.
Reliable – produced under rigid quality control and quality shall never vary.
Its grading given optimum strength and durability to the finished floor being on-oxidising
Easy cleaning
Impact resistance
It is very suitable for such concrete which are plain cured
It reduces the dusting
Increases production rate
Increases compressive and flexural strengths
Improves visual appeal, color, and texture
Reduces absorption rates
Reduces breakage and culls
Reduces efflorescence potential
Potential cement and pigment reduction
Extends life of mold and other machine parts
Fast and efficient.
Easy to use, only mix with water.
Better bonding strength.
Can be grouted within 24 hours without waiting for the moisture to evaporate.
Applicable on existing tiles, many special substrates like polished cement, drywall system, etc.
Thinner layer
Promotes good compaction with easier placement at high ambient temperature.
Extends placing and compaction times of larger hours
Rapid strength gains-higher strength without increase in cement
Reliability: Most consistent quality and rigid control
Extremely high workability speeds construction
Reduced segregation with increased cohesion.
Application by hand operated or power driven units, saves, time labour and money.
Curing efficiency is above 90%..
Provides hard wearing surface and prevents dusting.
Most versatile – suitable on all types of formwork, wood, metals, plastic etc.
Economical coverage rates by spraying
Dries in 1-2 hours and is then not affected by rain.
Life to shutter or formwork increases.
Speedy development of initial hardness – minimise maintenance disruption.
Highly chemical resistant against acids, alkalis and industrial chemicals.
Natural concrete colour – any other colour is available on request.
Outstanding resistance to water, weather and abrasion.
Excellent wetting properties enhance Adhesion to substrate and over coating.