Water-Seal Stretch

Waterseal is an integral cement waterproofing compound in powder form. It is used for waterproofing and damp proofing of concrete/plaster/mortar/renders/screeds etc. (ISI Marked).

ACRO WATER SEAL STRETCH is a fiber reinforced elastomeric liquid waterproofing membrane. It is formulated with select high-quality elastomeric and resilient acrylic polymers, reinforcing fibers, properly selected and graded fine fillers, many additives, and water as a medium. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.

 

Make an Enquiry Find A Store

Benefits

  • High durable

  • Economical

  • Damp-proof, heat-reflective

  • Liquid instant leak plugging

  • Nonflammable & pollution free

  • Excellent bonding strength

  • Algae and fungus resistant

  • Weather resistance

  • Reduce maintenance cost

  • Prevents seepages from the ceiling and walls

  • Water absorption can be decreased

  • Protection from Environmental Effects

  • Extremely useful for Blindside Work

  • Provides a reliable secondary barrier against rainwater, moisture and ground water ingress into the concrete

  • Smooth Finish

  • Non-Toxic suitable for contact with Drinking Water

  • Protects against the effects of concrete carbonation, efflorescence or salt petering

  • Waterproofing protection of up to 7 bar hydrostatic pressure

  • High sheen, brilliant white colour and thick coat results in a high levels of heat reflectance

  • Reduces carbon dioxide and chloride ion diffusion thus protecting rebars against corrosion

  • Unmatched crack bridging ability due to elastomeric properties

  • Reinforced with fibres for superior abrasion resistance

  • Strong adhesion to masonry substrates

  • Single pack, easy to apply by brush /roller and simple recoating

  • Acropoxy BA can be applied to both dry and wet surfaces.

  • Far greater bond strength than the tensile strength of the concrete. Most suitable for structural bonding of new to existing concrete.

  • Special slow set hardener is available on request

  • Reliable * Produced under strict quality control.

  • It compensates plastic shrinkage and natural settlement in cementitious grouts.

  • It gives high fluidity with lower W/C ratio for easier placement and injection.

  • Chloride Free – no corrosion.

  • Reliable – produced under rigid quality control and quality shall never vary.

  • Its grading given optimum strength and durability to the finished floor being on-oxidising

  • Easy cleaning

  • Impact resistance

  • It is very suitable for such concrete which are plain cured

  • It reduces the dusting

  • Increases production rate

  • Increases compressive and flexural strengths

  • Improves visual appeal, color, and texture

  • Reduces absorption rates

  • Reduces breakage and culls

  • Reduces efflorescence potential

  • Potential cement and pigment reduction

  • Extends life of mold and other machine parts

  • Fast and efficient.

  • Easy to use, only mix with water.

  • Better bonding strength.

  • Can be grouted within 24 hours without waiting for the moisture to evaporate.

  • Applicable on existing tiles, many special substrates like polished cement, drywall system, etc.

  • Thinner layer

  • Promotes good compaction with easier placement at high ambient temperature.

  • Extends placing and compaction times of larger hours

  • Rapid strength gains-higher strength without increase in cement

  • Reliability: Most consistent quality and rigid control

  • Extremely high workability speeds construction

  • Reduced segregation with increased cohesion.

  • Application by hand operated or power driven units, saves, time labour and money.

  • Curing efficiency is above 90%..

  • Provides hard wearing surface and prevents dusting.

  • Most versatile – suitable on all types of formwork, wood, metals, plastic etc.

  • Economical coverage rates by spraying

  • Dries in 1-2 hours and is then not affected by rain.

  • Life to shutter or formwork increases.

  • Speedy development of initial hardness – minimise maintenance disruption.

  • Highly chemical resistant against acids, alkalis and industrial chemicals.

  • Natural concrete colour – any other colour is available on request.

  • Outstanding resistance to water, weather and abrasion.

  • Excellent wetting properties enhance Adhesion to substrate and over coating.

Download TDS

Areas of Application

Calculator