TECHNICAL DATA

Area of Application :
Ceiling & Plaster / Concrete / Asbestos cement sheets / Brick work etc.

Method of application :
Brush / Roller / Spray

Thinner :
Water

Drying Time :
Surface Dry – 10-15 minutesHard Dry – 4 hours

Recoating Interval :
4 hours

Coverage :
20-25 m2 / ltr. / coat on a well prepared surface.

Finish :
Smooth & matt

Shades :
White & Base

Packing :
20 ltrs., 10 ltrs., 4 ltrs. & 1 ltr.

Cleaning :
Clean all equipment with water immediately after use.

Primers :
Acroprime Universal Primer

DIRECTIONS FOR USE Surface Preparation :
New plaster should be allowed to dry for atleast 4-6 months. Ensure that the surface to be painted should be free from dirt, dust, rust, oil, grease and foreign matter. On previously painted surface existing loose painted films must be removed. Any lime wash, powder distemper etc. should be scraped off completely. All fungus affected area should be given a suitable treatment. All cracks and surface imperfections should be suitably repaired before undertaking the painting. The surface should be completely dry and sound at the time of painting.

Application :
On a well prepared surface, apply 2-3 coats of Aqualin Acrylic Emulsion to get the desired results. Universal stainers or tinters can be used to get desired shades.

Material Handling :
1. Store in a cool & dry place.
2. Stir well before use, Strain, if needed.
3. Do not over-thin the paint or over-extend the brush.