TECHNICAL DATA :

Area of application : Interior Plasters, Brickwork, Asbestos etc.
Method of application : Brush / Roller / Spray
Thinner : Municipal water
Drying Time : The same will depend upon temperature and humidity. However, for normal conditions :Touch Dry - 30 minutes
Re-coating interval : 4 - 6 hours.
Coverage : 12 to 15 m2 per kg. / coat application
Finish : Smooth and Matt.
Shades : As per Shade Card
Packing : 20 Kgs., 10 Kgs., 5 Kgs. & 2 Kgs.
Cleaning Up : Clean all equipment with water immediately after use.
Primer : Acroprime Cement Primer (Water Thinnable / Solvent Thinnable)

DIRECTIONS FOR USE :-
Surface preparation : Newly plastered surface should be matured for at least 4-6 months. Surface to be painted should be free from grease, dirt, dust or all kinds of loose particles.

Application : Any previous coating should be removed by wire brush. All surface imperfections should be levelled. Surface should be sound, clean and completely dry at the time of application of paint. A coat of cement primer may be applied where necessary.3 parts of Aqualin Premium Plus should be mixed well by adding 2 part of water by weight or 1:1 by volume slowly to the distemper paste to make a brushable consistency paint and applied in 2 to 3 coats to get satisfactory results.

Material Handling :
1. Store in a cool & dry place.
2. Mix well before use. Strain if needed.
3. Do not over-thin the paint or over-extend the brush.